Bombardier SeaDoo 1992 factory shop manual, Page 118Get this manual
Section 05 FUElL SYSTEM Sub-section 03 (CARBURETORS1
CAUTIONWater must be supplied cool engine with flush kit (PN 295 000 038)Turn, screw so that engine idles between 1300 to 1500 RPM {in water) or 2400 to 2600 RPM (out of waterlStop englneand recheck 011 injectIan lpump aliglning marks and readjust as necessary CAUTiONOil injection pump adjustment must be checked each time carburetor is adjustedImproper oil pump adjustment can cause severe engine damage
CAUTIONImproper cable full throttle adjustment will cause strain an cable and or damage cable bracket or throttlelever alt handlebar
T adjust, loosen jam nut then turn adjustment nut as necessaryAdjustment nut Inot shown1
ADJUSTMENTS (Twinl Carhuretors)
Thttle Cable
CAUTIONMake sure engine is turned off before adjusting throttle cableLubrlcate cable wtlh SEA-DO0 LUBE Throttle lever must reach handlebar grip without causing straln to cable or carburetor cable bracketTighten jam1 nut and recheck adjustmentWARNINGMake sure idle set screw contacts stopper when throttle lever is fully relleased at handlebar