Bombardier SeaDoo 1992 factory shop manual, Page 88Get this manual
Section 03 ENGINE Sub-section 06 (ROTARY VALVE AND RESERVOIR)
Position ball bearing shielded side towards rotary valve
If plug has been removed, clean plug and crankcase hole with Loctite Safety Primer 293 800 019) Apply Loctite Primer 'IT" and Loctite 648 (green) 4Pl 290 899 788) insidle crankcase hole, then press plug into crankcase
11,12, Seal, Rotary Valve Shaft
Apply lithium grease on seal lipsIPosition seal with shielded portion against shaft splines