Bombardier SeaDoo 1990 factory shop manual, Page 168Get this manual
Section 10 HULLIBODY
Sub-section 01 (HULLBODY 1
Install brackets "B" (IPN 291 000 213) to support the rear section of tank and secure them with M6 stainless screws212 000 004) and lock nuts 212 000
CAUTIONAllow at least 30 minutes for primer culreApply Sikaflex sealant 221 lP 293 530 011) on water tank trap and slide it back to its position
Sikaflex primer 449
Install fuel tank and storage coverFa01 011 013 F001 080
To install enqine,refer to 'ENGINE1', section 03 subsection 02Install jet pump unit ass'y, refer to "PROPULSIONDRIVE SYSTEMS" section 08
Verify tightness of all fuel lines and clamps and pressurize fuel system For pressurization procedure refer to "FUEL SYSTEM", section 05