Bombardier SeaDoo 1990 factory shop manual, Page 163Get this manual
Sectlion 09 STEERING SYSTEM Sub-section 01 (STEERING SYSTEiM)
Chleck jet pump nozzle position by placing straight edge on nozzle outer end Straight edge should be parallel to rear of watercraft-
Clearance area
Parallel to rear of watercraft
Steering alignment adjustment should be performed on outer cable adjustment nuts on steering cable bracket near steering stem-,
Adjust nuts so that nozzle pivots from side to side but does not contact venturi housing on either sideTo verify, insert paper sheet or feeler gauge 13 mm( 005 in) between nozzle and venturi at indicated area