Bombardier SeaDoo 1990 factory shop manual, Page 151Get this manual
Section 08
PROPULSIONDRIVE SYSTEMS Sub-section 01 (PROPULSIONDRIVE SYSTEMS)
Ins,erting single-'lip seal
Apply Loctite 515 all around
It is recommended to use special tool 295 000 014) to avoid lip damage on double-lip seal Push seal until it comes flush with its housing
NOTESeal carrier gear clamps should not be tightened until pump is installed, to insure perfect alignment
NOTEWhenever replacing the double lip seal, an hydrodynamic seal should be installed Always install seal with the protector facing the impeller