Bombardier SeaDoo 1990 factory shop manual, Page 150Get this manual
Section 08 PROPULSIONDRIVE SYSTEMS Sub-section (PROPULSIONDRIVE SYSTEMS)
37.38.39.40.41,
Ridle ShoeScrewGrate
Apply Loctite 587 Superflex Ultra Blue (PIN 293 800 0161 on ride shoe as shown in the following illustration
Apply silicone as indie ated by shaded area Apply silicone on left and right ribs
Fa01 009 067
49,50,52, SealSeal Carrier
Install double-lip seal toward impeller side and single lip seal toward engine sideOn both seals, raised edge of lip must be located outwards of seal carrier
Carefully install ride shoe on hull Apply Loctite 242 (blue) 293 800 015) on screw threads, install and tighten in criss-cross sequence Torque to 10 Nm (88 lbfin) From inside of bilge, apply Loctite 732 RTV Silicone293 800 006) on end of screws to completely seal hull