Bombardier SeaDoo 1990 factory shop manual, Page 115Get this manual
Section 07 ELECTRICAL Sub-Section 05 (CDICHARGING SYSTEMS)- Indicator Lamp Lights at Lower Setting
This indicates that the output sless than that designed 1
to operate in satisfactory mannerHowever, before
Tester wires
Component wires
coming to the conclusion of faulty condition be certain that correct engine cranking conditions were met brfore condemning the tested part
BLACK1RED of magneto harness BLACK WHITE of magneto harness
Indicator Lamp Does Not Light
Orie component is defectiveProceed as instructed to find defective component
Intermittent Ignition Problems
In dealing with intermittent problems there is no easy diagnosis For example, problems that occur only at not rnal engine operating temperature have to be tested under similar conditions
In cases of temperature andor vibration failure, only parts replacement can solve the problem as most of these failures return to normal when engine IS not runningMuitiple Problems
There is always the possibility of more than one faulty pa If after component has been replaced1, problem the still persists, carefully repeat the complete test procedure to find the other faulty part