Bombardier SeaDoo 1990 factory shop manual, Page 90Get this manual
Section 06 OIL SYSTEM Sub-section 01 (RiEPAIRADJUSTMENT)
Bleeding
Synchronization
CAUTIONoil injection pump adjustment is dependant on throttle cable position, make sure pelrforlm throttle cable adjustment fiirstEliminate throttle cable free-play by depressing throttle lever until slight resistance is feltIn this position, marks on pump body and lever must align
CAUTIONOil injection system must be bleeded and adjustment checked before operating engineEnsure oil injection reservoir is sufficently filled Install dry rag below oil injection pump Remove bleed screw to allow oil to flow
Must be full of 011
NOTEmirror may be used to facilitate this verificatilon
If necessary, turn cable nuts to obtain pump mark alignment