Bombardier SeaDoo 1989 factory shop manual, Page 127Get this manual
Section 08 PROPULSIONDRIVE SYSTEMS Sub-section 01 (PROPULSIONDRIVE SYSTEMS)
17,20,35, Venturi, Screw0-Rilng
Install new 0-Rings around bailer passages Position ventun with bailer passages on top Apply Loctite 515 Gasket Eliminator (PIN 293 800 007) on mating surface Apply Loctite 242 (blue)293 800 002) on threads and install screws and washers then torque to 20 Nwm (15 IbfaftJ in criss-cross sequence
Bailer passages aligned
37,38,39,40,41, Shoe, ScrewGrate Ride
Apply Loctite 587 Superflex Ultra Blue293 800 016) on ride shoe as shown in the following illustrationLoclite 242 Lociite 515 on mating surfaces