Bombardier SeaDoo 1989 factory shop manual, Page 117Get this manual
Section 08
PROPULSIONDRIVE SYSTEMS Sub-section 01 (PROPULSIONDRIVE SYSTEMS)
DISASSEMBLY
CAUTIONDo not pull drive shaft to release it from impeller, this could damage bootBoot must be slipped out of impeller before removing drive shaftInsert screwdriver blade between umweller and flange of boot Carefully pry boot all around to release from impeller To ease this operation, apply liquid soap between boot and impeller, as they begin to separate
Square lube
Angle bar extendable)
Head of 100 rnm screw, welded against angle bar peak
FOOT 009 5
square tube
Nut welded against angle bar peak
Insert special tool between ride shoe ribs and hull as shown