2004 Polaris Freedom, Virage, Genesis and MSX-140 Service Manual., Page 210Get this manual
PROPULSION Driveshaft AlignmentAll Models
15Carefully insert the taperedend of the PUMP ALIGNMENT TOOL, PN 2871343, through the pump statorSecurely mount the pump stator to the pump housing(Photo D)
PUMP STATOR HOUSING
(Photo16THE TAPERED END MUST FIT EASILY INTO THE BORE USING LIGHT PUSHING FORCETHE SHAFT MUST FULLY ENGAGE AND HIT THE CRANKSHAFT END(Photo E) If the Driveshaft Alignment Tool slides in and out of the Driveshaft Alignment Coupler Tool as outlined in STEP 16, adjustments to the engine strap mounting shims ARE NOT REQUIREDIn this case, remove the tools and proceed with the REASSEMBLY PROCEDURESIn the case where the Driveshaft Alignment Tool DOES NOT fit into the Driveshaft Alignment Coupler Tool as outlined in STEP 16; proceed with the ALIGNMENT PROCEDURE