2004 Poalaris MSX110, MSX150 PWC Original Service Manual, Page 209Get this manual
HULL AND BODY Steering Cable Adjustment
1Open front compartment doorLoosen and remove adjuster blockAlign handlebars with centerline of watercraft(Straight) 2Place straight edge across horizontal center line of steering nozzle or trim nozzle3Measure distance from straight edge to hull on left and right sideBe sure to measure at right angles to the straight edge and at equal distances from the nozzleThe distance at (X) should be equal when handlebars are straight4Adjustments can be made at the adjuster blockTurn block clockwise or counterclockwise until (X) measurements equal5Tighten adjuster block screws to specificationx
Straight Edge Nozzle Hull Hull x
Distance should be equal at (X)