2004 Poalaris MSX110, MSX150 PWC Original Service Manual, Page 191Get this manual
PROPULSION Intake ScoopRide Plate Removal and InstallationContinued 1Insert inlet scoop into pump cavityApply marine grade silicone to scoopride plate mating surfaceApply Silicone
Marine Grade Silicone PN 8560054
2Apply marine grade silicone to pump mount assembly, and inlet scoop to pump mount mating surfaceWARNING: Do not allow silicone to enter the water inlet pipe or bilge siphon inletSevere engine damage may occur if the water inlet pipe is obstructed3Attach pump mount to hullPump Assembly Mounting Nuts 28ft.lbs(39Nm) Apply anti-seize lubricant to threadsUse criss-cross pattern when fastening
Apply Silicone