2004 Poalaris MSX110, MSX150 PWC Original Service Manual, Page 190Get this manual
PROPULSION Intake ScoopRide Plate Removal and Installation Removal
1Remove pump assembly as outlined on pages 5.10 to 5.121Remove the inlet grate and ride plate mounting bolts2Insert length of 2x4 wood through the water inlet housing from the rear of the watercraftRest the 2x4 on top of the ride plate3Using your foot, apply downward force to the 2x4This will remove the ride plate from the hull along with the inlet grate4Remove the pump mount assembly by removing the mounting nuts from inside the hullGently pry the pump mount assembly from the hull5Using the same method, remove the inlet scoopWARNING: Some inlet scoops are made of plasticUse less force when removing
Inlet Grate Mounting Bolt
Ride Plate Mounting Bolts
Installation