2004 Poalaris MSX110, MSX150 PWC Original Service Manual, Page 186Get this manual
PROPULSION Driveshaft AlignmentAll Models
13Carefully insert the taperedend of the PUMP ALIGNMENT TOOL, PN 2871343, through the pump statorSecurely mount the pump stator to the pump housing(Photo D)
PUMP STATOR HOUSING
(Photo14THE TAPERED END MUST FIT EASILY INTO THE BORE USING LIGHT PUSHING FORCETHE SHAFT MUST FULLY ENGAGE AND HIT THE CRANKSHAFT END(Photo E) If the Driveshaft Alignment Tool slides in and out of the Driveshaft Alignment Coupler Tool as outlined in STEP 16, adjustments to the engine strap mounting shims ARE NOT REQUIREDIn this case, remove the tools and proceed with the REASSEMBLY PROCEDURESIn the case where the Driveshaft Alignment Tool DOES NOT fit into the Driveshaft Alignment Coupler Tool as outlined in STEP 16; proceed with the ALIGNMENT PROCEDURE