2004 Poalaris MSX110, MSX150 PWC Original Service Manual, Page 184Get this manual
PROPULSION Driveshaft Alignment
1Disconnect the NEGATIVE () first, then POSITIVE (+) battery cables from the batteryDO NOT PROCEED WITHOUT PERFORMING STEP 1! 2Remove coupler guard(Illustration 1)
3Remove the reverse cable and steering cable linkage from the pump(Photo A) Discard all Nylokt nutsRemove the four pump mounting bolts that mount the pump sections to the pump housingRemove the pump sections4Backup the drive couplers using large pipe wrench or strap wrench and remove the driveshaft using the DRIVESHAFT REMOVALINSTALLATION TOOL, PN PW46593Remove the driveshaft from the watercraftNOTE: Do not damage the drive coupler fingers(Photo A)