2004 Poalaris MSX110, MSX150 PWC Original Service Manual, Page 178Get this manual
PROPULSION Bearing Carrier Removal
The bearing carrier uses sealed bearingsBearing maintenance or lubrication is not required123456From inside the engine compartment, remove the drive coupler guardRemove the pump assembly as outlined in the Pump Removal sectionObtain strap wrench and driveshaft removal toolHave an assistant secure the aft (Rear) drive couplerUsing the driveshaft removal tool, PN PW46593, carefully loosen the driveshaft from the couplerCarefully pull the driveshaft through the rear of the craftLoosen and remove the four (4) bearing carrier mounting boltsRemove bearing carrier
Bearing Carrier Installation