2004 Poalaris MSX110, MSX150 PWC Original Service Manual, Page 46Get this manual
ENGINE REMOVALINSTALLATION Engine Removal and InstallationContinued
4Locate the fuel hose quick disconnect on top of the fuel railWrap shop towel around the disconnect and press the two tabs in while pulling up on the connector5Remove the fuel supply and fuel return hoses from the fuel rail(Identify hoses for reassembly 6Remove all of the hoses connected to the oil storage tank(Photo B) Identify each hose and its location during removal7Unlatch the TOP worm gear clamp that secures the oil storage tank to the rear of the engineNOTE: Do not loosen or tighten the lower worm gear clamp! 8Lift the oil storage tank up and out of the cradle9Remove the two lower tank hose connectionsIdentify each hose and its location during removal(Photo C) 10Remove the cyclonetosump oil return hose from the oil separator cyclone11Carefully lift the oil storage tank out of the engine compartmentPHOTO B