2003 Polaris MSX 140 Personal Watercraft Service Manual, Page 73Get this manual
EngineCooling W120HO- DFI Engine Assembly 4Apply thin, even layer of sealer to entire surface of lower crankcase halfCAUTION: Do not allow sealer to dryCrankcase must be assembled immediately to ensure proper fit of main bearing outer race in crankcase
Loctitet Flange Sealant 518 PN2871961
5Place upper crankcase half on lower half aligning the retainer clip and seals6Apply Loctitet 242 to crankcase boltsInstall and tighten bolts to specification and sequenceSequence is shown on page 3.2Crankcase Bolt Torque 8mm 22ft.lbs(30 Nm) 10mm 28ft.lbs(38 Nm) Apply Loctitet 242