2003 Polaris Freedom, Virage and Genesis PWC Service Manual, Page 100Get this manual
EngineCooling Engine AssemblyAll Engines 5Apply thin, even layer of sealer to entire surface of lower crankcase halfCAUTION: Do not allow sealer to dryCrankcase must be assembled immediately to ensure proper fit of main bearing outer race in crankcase
Crankcase Sealer 3-Bondt1215 PN 2871557 6Place upper crankcase half on lower half aligning the retainer clip and seals
7Apply Loctitet 242 to crankcase boltsInstall and tighten bolts to specification and sequenceSequence is shown on pages 3.5 to 3.8Crankcase Bolt Torque 8mm 22ft.lbs(30Nm) 10mm 28ft.lbs(38Nm) Apply Loctitet 242