2002 Polaris Freedom, Virage, Genesis PWC Service Manual, Page 238Get this manual
HullControl Systems Footpad RemovalApplication
4Peel small portion of backing material away from the new footwell pad, and immediately apply to deck5Work the pad with your fingertips until the entire pad is pressed onto the deck surfaceConstant pressure activates the adhesive and works out any air bubbles out from under the pad6Allow for 24 hours for adhesive to cureNOTE: Do not allow the pad temperature to exceed 80F, or below 60F for at least 24 hoursAlways cover the watercraft when exposed to direct sunlight for long periods time