2002 Polaris Freedom, Virage, Genesis PWC Service Manual, Page 206Get this manual
Final DrivePropulsion Pump Alignment
NOTE: Checking the pump alignment is not required if the alignment is not suspectYou need only to verify alignment if alignment is determined to be incorrectSymptoms of incorrect pump alignment are, but not limited to: stripped driveshaft, stripped coupler splines, broken engine mounts, and unevenly worn driveshaft, and worn bearing carriers1If pump housing was removed, begin by reattaching to the hullRefer to pages: 5.3 and 5.4 for bolt torque2Disconnect lanyard cord lock plate from engine stop switchRemove battery negative cable3Remove impeller and stub shaft from pump housingInspect bearings for wear or damage and replace if necessarySee Stator DisassemblyInspection this section4Assemble pump without stub shaft, impeller, or tail coneApply Marine Grade Silicone Sealant PN 8560054