2001 Polaris SLX, PRO 1200, Virage TX, Genesis, Virage TXi, Genesis i Personal Watercraft Service Manual, Page 334Get this manual
Diagnostic Software 1Locate the diagnostic port on the engine wiring harnessIt is positioned to the aft of the EMM on the starboard side of the boatThe port has cover to keep connections cleanRemove the cover to access the portConnect the communication cable (PN 2872454) to the diagnostic port on the watercraftNOTE: When you are finished with all testing, make
Diagnostic Cable These are connected during engine operation Diagnostic Portr"""l Cap
sure you protect the diagnostic port by reinstalling coverConnect the other end of the diagnostic cable to the serial port on the laptop computer2Disconnect the 8-pin connector to the EMM and install the FFI'" EMM Service Power Connector PN 2872456This will power up the EMM3If removed, reinstall the lanyard