2001 Polaris SLX, PRO 1200, Virage TX, Genesis, Virage TXi, Genesis i Personal Watercraft Service Manual, Page 301Get this manual
Electrical Systems Warning Systems Oil Level Sensor Troubleshooting
Problem: No oil level indication andor low oil warning at MFD1Open electrical box and disconnect oil level sensor wiresMeasure resistance of sender wires and compare to specificationsConsult the appropriate wiring diagram for specifications and wire colorsInspect all electrical connections including the pins in the harness connector on the back of the MFDConnections must be clean and tightRefer to MFD troubleshooting tips at the end of this chapter for more informationPolaris Electric Quick Trim System Operation
The Quick Trim system is operated by thumb activated rocker switch located on the left side handlebar controlAn electric motor controls the attitude of the steering nozzle end cone via control link rod and is monitored by the MFDAs the trim indicator moves to the plus (+) side with the nozzle, the front of the craft will liftWhen the indicator moves to the minus (-) side with the nozzle, the front of the craft will push downward, helping to prevent the bow from jumping up and down (porpoising)