2001 Polaris SLX, PRO 1200, Virage TX, Genesis, Virage TXi, Genesis i Personal Watercraft Service Manual, Page 248Get this manual
HullControl Systems Steering Cable Adjustment
1Open front compartment door and then tool kit door2Locate alignment hole on the bottom of the steering postInsert 18" dowel or drill bit into holeThe steering assembly is now locked in the correct positionPlace straight edge across horizontal center line of steering nozzle or trim nozzleNOTE: The trim nozzle mounting bolts can be used as reference for the center line on models with Quick TrimSee III2
Rear View Of Pump Nozzle
Place straight edge across horizontal center line of steering nozzle or trim nozzleIII2 4Measure distance from straight edge to hull on left and right sideBe sure to measure at right angles to the straight edge and at equal distances from the nozzleThe distance at "X" should be equal when handlebars are straightSee III3After adjustments are made, remove the drill bit or dowel prior to operating the watercraft