2001 Polaris SLX, PRO 1200, Virage TX, Genesis, Virage TXi, Genesis i Personal Watercraft Service Manual, Page 216Get this manual
Final DrivePropulsion Pump Alignment
NOTE: Checking the pump alignment is not required if the alignment is not suspectYou need only to verify alignment if alignment is determined to be incorrectSymptoms of incorrect pump alignment are, but not limited to: stripped driveshaft, stripped coupler splines, broken engine mounts, and unevenly worn driveshaft, and worn bearing carriers123If pump housing was removed, begin by re-attaching to the hullRefer to pages: 5.3 and 5.4 for bolt torqueDisconnect lanyard cord lock plate from engine stop switchRemove battery negative cableRemove impeller and stub shaft from pump housingInspect bearings for wear or damage and replace if necessarySee Stator DisassemblyInspection this sectionAssemble pump without stub shaft, impeller, or tail coneApply Marine Grade Silicone Sealant PN 8560054Install stator housing to pump housingmounting bolts to 18 ftIbs(24.8 Nm)