2001 Polaris SLH, Virage PWC Factory Service Manual, Page 249Get this manual
Electrical Systems Warning Systems Oil Level Sensor Troubleshooting
Problem: No oil level indication andor low oil warning at MFD
11 Open electrical box and disconnect oil level sensor wires Measure resistance of sender wires and compare to specificationsConsult the appropriate wiring diagram for specifications and wire colors12Inspect all electrical connections including the pins in the harness connector on the back of the MFDConnections must be clean and tightRefer to MFD troubleshooting tips at the end of this chapter for more informationOil Level Sending Unit Resistance Full (Float up)35 Ohms Empty (Float down)240 Ohms All readings 10 at room temperature
Polaris Electric Quick Trim System Operation
The Quick Trim system is operated by thumb activated rocker switch located on the left side handlebar controlAn electric motor controls the attitude of the steering nozzle end cone via control link rod and is monitored by the MFDAs the trim indicator moves to the plus (+) side with the nozzle, the front of the craft will liftWhen the indicator moves to the minus (-) side with the nozzle, the front of the craft will push downward, helping to prevent the bow from jumping up and down (porpoising) o