2001 Polaris SLH, Virage PWC Factory Service Manual, Page 202Get this manual
HullControl Systems Steering Cable ReplacementSLHVirage
1Disconnect cable at steering arm and at steering nozzle by removing boltnut, and washerLoosen jam nut and unscrew tie rod ends Remove sealing nut at pump end of cable
Remove Nut
Pull cable out of hull making note of cable routing Route new cable around left hand side of engine and batteryAfter passing cable through threaded fitting Seal the cable, nuts and washers with Marine Grade silicone sealantTighten nutsto propertorque Refer to pages 6.5-6.6 for torque specifications