2001 Polaris SLH, Virage PWC Factory Service Manual, Page 184Get this manual
Final DrivePropulsion Intake ScoopRide Plate Removal and Installation Removal
1Re move pump assembly as outlined on pages 5.6 to 5.81Remove the inlet grate and ride plate mounting bolts2Insert length of 2x4 wood through the water inlet housing from the rear of the watercraftRest the 2x4 on top of the ride plate 3Using your footapply downward force to the 2x4This will remove the ride plate from the hull along with the inlet grate4Remove the pump mount assembly by removing the mounting nuts from inside the hullGently pry the pump mount assembly from the hull5Using the same method, remove the inlet scoop
Installation
12Begin the installation process by removing all silicone from the ride plate, inlet scoop, pump mount assembly, and inlet grate mating surfacesPrepare mating surfaces by wiping surfaces down with isopropyl alcohol or acetone