2001 Polaris SLH, Virage PWC Factory Service Manual, Page 40Get this manual
Maintenance EngineContinued Throttle Cable AdjustmentVirage
12On models equipped with inline adjusters, loosen the lock nutTurn the adjuster in (clockwise) to increase the amount of throttle lever freeplayTurn the adjuster out (counterclockwise) to decrease the amount of freeplayTighten locknut securely when adjustment is completeStart engine and turn handlebars to left and right through entire turning rangeIf engine RPM increases re-check cable condition, routingand lever free play, and correct or adjust as necessaryCAUTION: I
Never operate the engine for more than 15 seconds without cooling waterSevere engine damage may occurfrom overheating
Choke Cable AdjustmentSLH
1Adjust choke cable by loosening lock nuts at carburetor and moving cable up or down in holder until lever has specified free playRemove air intake cover and observe choke plate positionThe choke plate(s) in carburetor(s) must close completely when choke is fully onand be completely vertical when the knob or lever is returned to the off position"0