2001 Polaris SLH, Virage PWC Factory Service Manual, Page 28Get this manual
Maintenance General LubricationContinued Drive Shaft Lubrication
WARNING
The plastic driveshaft shroud is designed to protect you from dangerous moving partsIt must be rotated out of the way to lubricate the driveshaft couplerFollow the instructions below in order to avoid person al iniuryCAUTION:
Grease drive shaft coupler and bearing housing anytime water in the craft has been at or above the coupler level to avoid damage to these partsRefer to the preventative maintenance schedule on pages 2.2 and 2.3
All Season Grease PN 2871423 All Season Grease PN 2871322 Needle Point Adaptor PN 2871174 Bonded Rubber Coupler
Driveshaft splines should be lubricated during pre-season maintenance, every 100 hours, or when pump is disassembledSealing O-rings at impeller end and inside coupler should be inspected and replaced if worn or damagedRefer to Final Drive section for driveshaft removal procedureUse Premium All Season GreaseLubricate O-ring and Splines