2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 221Get this manual
http:ReadManm
HULUDECK, STEERING AND CONTROLS FRC Fiberglass Repair
Gel Coat Nick or High Spot Repair
1 Lightly sand area using 600 grit paperwater 234Wipe down with dry cloth Brush on thin film of Aqua Buff 2000 1M Buff clean
FRC Fiberglass Repair (HULL) Some hulls are constructed of hand laid fiberglassNormal fiberglass repair procedures applyDamaged fiberglass can be easily repaired by following few basic steps123456Remove all damaged material with sabre saw or grinderUsing disc grinder or die grinder, taper fiberglass 1" (2.5 cm) back from patch area on inside of partApply masking tape to outside of part to form moldMix enough polyester resin and catalyst to complete the repair, following instructions for resin being usedApply resin to inside of patch area using disposable paint brushLay in small pieces of shredded fiberglass matUse the paint brush to force air bubbles outAdd more resin and move mat around