2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 214Get this manual
http:ReadManm
HULUDECK, STEERING AND CONTROLS Steering CoverSteering Post
Steering CoverSteering Post (Handlebar) Removal ContRemove steering cover (handlebar pad) by loosening the (6) screws located on underside of padrearwardNote throttle cable and switch wire .routing for reassembly
Virage TXGenesis Models
2Spread bottom of cover apart and lift it up and
3If handlebar is to be replaced, remove screws on
throttle block and remove blockIf post is not being replaced disconnect cable from throttle leverRemove cable from throttle block by loosening jam nut and unscrewing adjuster45Remove the (3) stop switch screws, separate the switch and set it asideRemove (4) bolts on handlebar clamp and remove handlebar