2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 144Get this manual
http:ReadManm
ENGINE AssemblyPolaris Engines
33 Carefully install injectors (FFI1M only) with fuel inleVoutlet ports facing intake sideWhen inserting injector, it is extremely important to install straight without binding injectorIt is vel)! important to torque bolts evenly in three steps to specification!
34 Lightly grease new inner and outer cover O-rings and place in grooves (SLXPro 1200 Virage TXGenesis)Be sure O-rings are properly positioned and grooves in cover are clean and free from debris35 Install covers with water manifold outlets on exhaust side (SLX Pro 1200 Virage TXGenesis)Do not tighten the bolts at this time36 Temporarily install water outlet manifold and bolts to ensure proper alignment of coversSLXPro 1200 Virage TXGenesis)37 Remove exhaust manifoldapply Ultra Copper1M silicpne, making sure surfaces are clean and free from burrsTorque evenly in three steps, as shown, to specification