2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 139Get this manual
http:ReadManm
ENGINE AssemblyPolaris Engines
11 Install Mag end bearing retainer circlip with ends facing upward as shown
12 Apply thin, even layer of sealer to entire surface of upper crankcase half
Do not allow sealer to dryCrankcase must be assembted immediately to ensure proper fit of main bearing outer race in crankcase
1-3 Place lower crankcase half on upper half aligning circlips and sealsPress into place
14 Apply LoctiteTM 242 (blue) to crankcase bolts, install and tighten to specifications following torque pattern shown in illustration at right