2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 50Get this manual
http:ReadManm
MAINTENANCEITUNE UP
Cleaning
Cleaning
1Remove drain plug and clean bilge and engine area with hot water and mild detergent (such as dish soap) or with bilge cleanerRinse and drain thoroughlyWipe up remaining water with clean, dry shop clothsDo not use abrasive cleaners Spray all external metal surfaces with Silicone SprayCoat all surfaces inside the engine compartment with Silicone Spray or non-flammable protectantDo not use petroleum based protectants or lubricants in the engine compartment, as most are flammable and also may deteriorate rubber componentsStore watercraft with drain plug removed and the seat propped open slightly to inhibit condensation from forming in engine compartmentWash exterior of watercraft with fresh water and mild detergentRinse thoroughlyInspect and thoroughly clean jet pump intake, outlet, and impeller areaInspect entire deck and hull area for damageInspect rub rails to be sure they are fastened securely