2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 40Get this manual
http:ReadManm
MAINTENANCEITUNE UP Cable Adjustments
Alternate Method Of Measuring Nozzle
Following is an alternate method for checking nozzle centering1Perform steps and on page NO TAG to center handlebars
Rear View Of Pump Nozzle
2Measure distance from rear-most edge of steering
nozzle (or trim nozzle) to stationary pump nozzle (extension housing) with 6" steel rule or vernier caliperMeasure at the same pOint on both left and right sides along horizontal center lineThe distance should be equalSee III1Measure on horizontal center line from rear of steering or trim nozzle to stationary nozzleDistance should be equalIII1