2000 Polaris Pro 785 Service Manual, Page 365Get this manual
ENGINECOOLING Engine InstallationFuji Engine Installation
Engine installation is done in reverse order of the removal instructions
WARNING
Do not install the battery ground (-) cable until all other fuel and electrical connections are done Hydrogen gas or fuel vapors may be present in the engine compartment and spark could ignite themresulting in personal injury
NOTE: Observe the following precautions:
Engine rubber mounts are stressed during engine removal of mounting nuts, Be sure to inspect the mounts carefully and replace if damagedAlways clean residual LoctiteTM out of threads before reinstallation Always use new gaskets on the exhaust system and electrical boxRemember to inspect for damage on any wiringhoses, or lines before and after reinstalling the engineMake sure all cables, hoses, and wiring are routed and secured properlyAfter engine installationpump alignment must be inspectedRefer to the Final Drive section for inspection and alignment procedures