1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 332Get this manual
ELECTRICAL Multi-Function Display Multi-Function Display
The Polaris Multi-Function Display (MFD) allows the operator to see such important information as time run, distance run, maximum speed, current speed, fuel level and more at the touch of buttonFollowing is summary of operating instructions for both styles of MFDsA description of Operating Modes and Key Function is listed below followed by Troubleshooting the MFD system
: liSiSoi ,Jl111 m'12
POLARIS
Muhi-Function Display
OPERATION AND MODES
NOTE: Not all MFDs have all these functions HOUR: Secondary display function controls multi-LCD when selected by mode keyHOUR annunciator is on when in HOUR modeActual engine run hours are displayed in .1 hour increments from to 999.9 hoursHOURS can be neither reset nor lost when power is removed due to nonvolatile EEPROM memoryCLOCK: CLOCK is secondary display function and controls multi-LCD when selected by mode keyCLOCK annunciator is on when in CLOCK modeTo set the time, first enter CLOCK mode and then hold the SET key for 2-4 seconds to enter CLOCK SET modeBoth keys are now used to adjust the timeMODE selects the digit, SET advances the digitPress MODE when complete to start the clock (colon begins to flash)PEAK SPEEDRPM: While in TACH mode, pressing the SET key will display both the peak speed and maximum sustained RPM since the last reset or auto-off occurredWhile displayed, holding the SET key for seconds will reset the peak memories