1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 312Get this manual
ELECTRICAL Temperature Warning Coolant Temperature Warning Circuit Operation
The MFD light is controlled by temperaturewarning switch installed into the engine cooling system When engine coolant temperature sensor reaches its "ON" temperature (see page 7.3) the switch closes, completing the current flow from the wire harness through the MFD and to groundThe system should be tested periodically for proper operation
Temperature Warning Circuit Test
Warning light in MFD is activated when temperature switch contacts are closed (overheat condition) and ground path is completeOn Fuji engines, the temperature sensor is located on the water outlet manifoldOn Polaris engines, the sensor is located on the exhaust manifoldGround the sensor wire from MFD with engine running to see if temp light activatesRefer to MFD functiontesting in this section