1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 293Get this manual
ELECTRICAL Specifications Stator Plate Assembly And Ignition System Test Specifications
All specifications are listed on the appropriate wiring diagramRefer to the wiring diagram for the model you are working onIf resistance specifications are not listed on the wiring diagram, use specifications listed belowRefer to test procedures in this sectionAll electrical resistance readings should be done at room temperatureReading may vary 10Disconnect component to be testedAlways subtract meter lead resistance when measuring small resistance valuesMeter readings were obtained using either FlukeTM 73 or TektronixTM DMM155 digital multitesterUse of other meters may produce different results
NOTE: Most meters will not be able to measure this low of resistanceTouch the meter leads together, view your meter, and record this readingMeasure from Black to BlacklWhiteThe reading should be the same as what you recorded when the meter leads were shorted together
1999 Pro 785 (Fuji Engine)
Component
Alternator Coil Trigger Coil