1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 287Get this manual
HULUDECK, STEERING AND CONTROLS FRC Fiberglass Repair Gel Coat Nick or High Spot Repair
1234Lightly sand area using 600 grit paperwater Wipe down with dry cloth Brush on thin film of Aqua Buff 2000 Buff clean
FRC Fiberglass Repair (HULL) Some hulls are constructed of hand laid fiberglassNormal fiberglass repair procedures applyDamaged fiberglass can be easily repaired by following few basic steps123 co co co
Remove all damaged material with sabre saw or grinderUsing disc grinder or die grinder, taper fiberglass 1" (2 .5 cm) back from patch area on inside of partApply masking tape to outside of part to form moldMix enough polyester resin and catalyst to complete the repair, following instructions for resin being used Apply resin to inside of patch area using disposable paint brush