1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 280Get this manual
HULUDECK, STEERING AND CONTROLS Steering Cable Replacement Steering Cable Replacement
1Disconnect cable at steering arm and at steering nozzle by removing bolt, nut, and washer
Loosen jam nut and unscrew tie rod endsRemove sealing nut at pump end of cableRemove Nut
Threaded Fitting
Pull cable out of hull making note of cable routing Route new cable around left hand side of engine and batteryAfter passing cable through threaded fittingSeal the cable, nuts and washers with Marine Grade silicone sealantTighten nuts to proper torqueRefer to pages 6.5-6.6 for torque specifications