1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 248Get this manual
FINAL DRIVEJET PUMPBILGE SYSTEM Pump Installation 5Apply light film of grease to new O-ring on the cooling water supply pipe
6Align interlocking tabs (0) and install stator housing to pump housingApply Loctite 242 (Blue) to the four 516" mounting bolts and torque to specificationNOTE: Install wedge between stationary housing and stator housing (where applicable)Thick edge is positioned toward bottom, and corner tabs must align See photo at right