1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 245Get this manual
FINAL DRIVEJET PUMPBILGE SYSTEM Pump Disassemblyllnspection Drive Shaft Inspection, Cont8Remove assembly from viseUsing soft face hammer, tap stub shaft out of housingInspect shaft and collar for wear, scratches, or damageInstall new O-rings upon reassembly
NOTE: Seals, bearings, and O-rings should be replaced if removedHeat the impeller housing evenly with heat gun to ease removal of bearings in next stepRemove tail cone O-ring before applying heat
10Using brass or aluminum drift, tap bearing spacer to one side enough to expose inner bearing racesDrive out tail cone end bearing and remove spacerDrive other bearing out removing seals with bearingSee page 5.18 for bearing and seal installation procedure