1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 244Get this manual
FINAL DRIVEJET PUMPBILGE SYSTEM Pump Disassemblyllnspection Drive Shaft Inspection, Cont5Remove tail cone screws (3) and tail coneInspect O-ring seal located in housing and replace if damage is evidentMount stub shaft flat surfaces in vise to keep the shaft from rotating
Install impeller removal tool and turn counterclockwise to removeThe tool can be identified by knurled sections on shaft (diameter is .852") Inspect impeller and stator vanes for cracks, wear, or damage and replace if necessary