1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 243Get this manual
FINAL DRIVEJET PUMPBILGE SYSTEM Pump Disassemblyllnspection Drive Shaft Inspection, Cont2Inspect driveshaft splines and splines inside engine drive coupler and impeller carefully for wear or damageReplace worn partsRubber bumpers control driveshaft end playReplace if worn, cracked or damaged
NOTE: If drive shaft, impeller, or coupler splines are worn or damaged, improper pump-to-hulI, or pump-to-engine alignment should be suspectedRefer to PumpDrive shaft Alignment on page 5.24-5.27 for more informationInspect bolts and pivot bushings, steering nozzle, trim nozzle, and reverse gate linkage for wea r, cracks, or damageReplace worn partsRemove these components as necessary for further pump disassemblyNote position of interlocking tabs in section housingsThey must be correctly aligned during reassemblyIII III