1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 242Get this manual
FINA DRIVEJET PUMPBILGE SYSTEM Pump Disassemblyllnspection 5Pump removal is easier if an assistant pushes the driveshaft out of the engine coupler (inside hull) while the pump is removed Note interlocking tabsThey must be correctly aligned during reassemblyRemove pump and shaft as an assemblyNOTE: The bearing housing (near engine coupler) should be inspected when pumpdriveshaft is removedOn models with extended pump, remove pump extension
Remove driveshaft from impeller by pulling straight outward
NOTE: If the pump housing, intake scoop, or ride plate must be removed, refer to page 5.22