1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 236Get this manual
FINAL DRIVEJET PUMPBILGE SYSTEM Pump Intake 1999 SLH SLX
Apply Marine Grease To O-ring
IMPORTANT!
Apply sealant to bolt after pushing through hull; before installing washer and nutNOTE: Hull has threaded insertTorque to ftIbs1.11 kg-m) Apply LoctiteTM 242 (Blue) "
IMPORTANT!
Apply continuous 112" (1.3 cm) bead of Marine Grade Silicone Sealant to all mating surfaces of the hull and scoopClean excess silicone afte installationNOTE: Replace inlet scoop if damaged or bentCavitation may result if marine grade silicone is not continuously applied pin hole leak may cause enough cavitation to damage stator and impellerAllow 24 hours to