1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 217Get this manual
ENGINECOOLING Engine InstallationPro 785 Engine Installation
Engine installation is done in reverse order of the removal instructions
WARNING
Do not install the battery ground (-) cable until all other fuel and electrical connections are doneHydrogen gas or fuel vapors may be present in the engine compartment and spark could ignite them, resulting in personal injuryNOTE: Observe the following precautions:
Engine rubber mounts are stressed during engine removal of mounting nutsBe sure to inspect the mounts carefully and replace if damagedAlways clean residual LoctiteTM out of threads before reinstallationAlways use new gaskets on the exhaust system and electrical boxRemember to inspect for damage on any wiring, hoses, or lines before and after reinstalling the engineMake sure all cables, hoses, and wiring are routed and secured properlyAfter engine installation, pump alignment must be inspectedRefer to the Final Drive section for inspection and alignment procedures